Requires no special tools, hardware or training Position… gaf quickstart® peel & stick starter roll parallel to mdthe roof edge, with the granule surface side facing up.
They are fastened along the eaves edges to seal down the first course of shingles and provide coverage material beneath the tab cutouts just like the top lap of each successive course.
Roofing starter strip roll. Then roll out the next strip to completely cover the eave starter and cover over the bottom portion of the two rake starters. The quickstart® peel & stick starter roll. Ab12345 | posted in construction techniques on may 16, 2011 01:54am we are replacing the lower parts of the rolled roofing on our garage and was told at the store that we would not need a starter strip since we were using rolled roofing?
The purpose of starter strips. Helps prevent damage from ice dams and comes with a sealing strip to also prevent wind uplift at the roof edge. Cut off or a starter strip that comes on rolls in various widths.
If removing your current shingles is a problem or a hassle, you can use rolled roofing. Installing a starter strip on your roof edges (over underlayment and/or ice and water shield). Then put the roll along the rake, starting at the eave and rolling up to the ridge with the sealant strip near the edge of the rake, on both sides of the roof.
Alternatively, you can install a second layer of asphalt. Eliminate the need for cutting shingle tabs or inverting them to create a starter row. This black sanded surface underlayment adheres directly to the roof deck.
Available in a roll size of. Place a 9 (229 mm) wide starter strip along eave and rake edges so it overhangs the drip edge 1/4 (6.3 mm). Available in handy individual rolls;
Available in a roll size of 7.2in. Starter strips have the advantage of stiffening shingles above and, viewed from below, providing a clean, unbroken line. Helps prevent damage from ice dams and comes with a sealing strip to also prevent wind uplift at the roof edge.
Is a starter strip needed when using rolled roofing instead of regular shingles? Use with any shingle that has an exposure of up to 6. Fast and easy installation along the roof edge.
Simply apply a single course of starter shingle roll along a clean, dry and smooth eave line or rake edge after removing the release sheet. Starter shingles (also known as starter strips) are a key component to your new roofing system. Sold as eight rolls per carton.
Rolled roofing comes in rolls of 100 square feet and, overall, is the least expensive roofing material. Quickstart peel & stick starter roll is designed for fast and easy installation eliminating cutting and nailing of starter strips on the roof. Quickstart ® peel & stick starter roll is designed for fast and easy installation.
Speeds installation and helps improve safety. Starter strip shingle eliminates the need to cut off tabs or headlap. Notice where the nails are placed on these special starter strips.
This black sanded surface underlayment adheres directly to the roof deck. It’s easy for a single person to position starter strip shingle on the roof. Roofing underlayment and drip edge have of course been applied first.
It protects the roof edge and provides anchoring power for high wind resistance at the critical eave and rake areas. Stagger nail the starter strips using 2 rows of nails spaced 1 (25 mm) and 8 (203 mm) in from roof edge, spaced 4 (102 mm) on center in each row. This shinglestarter must be covered within 30 days of application.